Tendinopathy alters ultrasound transmission in the patellar tendon during squatting

Measurement of loading patterns of the patellar tendon during activity is important in understanding tendon injury. We used transmission-mode ultrasonography to investigate patellar tendon loading during squatting in adults with and without tendinopathy. It was hypothesized that axial ultrasonic velocity, a surrogate measure of the elastic modulus of tendon, would be lower in tendinopathy. Ultrasound velocity was measured in both patellar tendons of adults with unilateral patellar tendinopathy (n=9) and in healthy controls (n=16) during a bilateral squat manoeuvre. Sagittal knee movement was measured simultaneously with an electrogoniometer. Statistical comparisons between healthy and injured tendons were made using 2–way mixed–design ANOVAs. Axial ultrasound velocity in both symptomatic and asymptomatic patellar tendons in tendinopathy was approximately 15% higher than in healthy tendons at the commencement (F1,23=5.2, P<.05) and completion (F1,23=4.5, P<.05) of the squat. While peak velocity was ≈5% higher during both flexion (F1,23=5.4, P<.05) and extension (F1,23=5.3, P<.05) phases, there was no significant between–group difference at the mid–point of the movement. There were no significant differences in the rate and magnitude of knee movement between groups. Although further research is required, these findings suggest enhanced baseline muscle activity in patellar tendinopathy and highlight fresh avenues for its clinical management.

Likelihood-maximising frameworks for enhanced in-car speech recognition

Speech recognition in car environments has been identified as a valuable means for reducing driver distraction when operating non-critical in-car systems. Likelihood-maximising (LIMA) frameworks optimise speech enhancement algorithms based on recognised state sequences rather than traditional signal-level criteria such as maximising signal-to-noise ratio. Previously presented LIMA frameworks require calibration utterances to generate optimised enhancement parameters which are used for all subsequent utterances. Sub-optimal recognition performance occurs in noise conditions which are significantly different from that present during the calibration session - a serious problem in rapidly changing noise environments. We propose a dialog-based design which allows regular optimisation iterations in order to track the changing noise conditions. Experiments using Mel-filterbank spectral subtraction are performed to determine the optimisation requirements for vehicular environments and show that minimal optimisation assists real-time operation with improved speech recognition accuracy. It is also shown that the proposed design is able to provide improved recognition performance over frameworks incorporating a calibration session.

Non-alcoholic fatty liver disease : can ultrasound assist in early diagnosis of prediabetes and delay progression to type2 diabetes mellitus

Non Alcoholic Fatty Liver Disease (NAFLD) is a condition that is frequently seen but seldom investigated. Until recently, NAFLD was considered benign, self-limiting and unworthy of further investigation. This opinion is based on retrospective studies with relatively small numbers and scant follow-up of histology data. (1) The prevalence for adults, in the USA is, 30%, and NAFLD is recognized as a common and increasing form of liver disease in the paediatric population (1). Australian data, from New South Wales, suggests the prevalence of NAFLD in “healthy” 15 year olds as being 10%.(2) Non-alcoholic fatty liver disease is a condition where fat progressively invades the liver parenchyma. The degree of infiltration ranges from simple steatosis (fat only) to steatohepatitis (fat and inflammation) steatohepatitis plus fibrosis (fat, inflammation and fibrosis) to cirrhosis (replacement of liver texture by scarred, fibrotic and non functioning tissue).Non-alcoholic fatty liver is diagnosed by exclusion rather than inclusion. None of the currently available diagnostic techniques -liver biopsy, liver function tests (LFT) or Imaging; ultrasound, Computerised tomography (CT) or Magnetic Resonance Imaging (MRI) are specific for non-alcoholic fatty liver. An association exists between NAFLD, Non Alcoholic Steatosis Hepatitis (NASH) and irreversible liver damage, cirrhosis and hepatoma. However, a more pervasive aspect of NAFLD is the association with Metabolic Syndrome. This Syndrome is categorised by increased insulin resistance (IR) and NAFLD is thought to be the hepatic representation. Those with NAFLD have an increased risk of death (3) and it is an independent predictor of atherosclerosis and cardiovascular disease (1). Liver biopsy is considered the gold standard for diagnosis, (4), and grading and staging, of non-alcoholic fatty liver disease. Fatty-liver is diagnosed when there is macrovesicular steatosis with displacement of the nucleus to the edge of the cell and at least 5% of the hepatocytes are seen to contain fat (4).Steatosis represents fat accumulation in liver tissue without inflammation. However, it is only called non-alcoholic fatty liver disease when alcohol - >20gms-30gms per day (5), has been excluded from the diet. Both non-alcoholic and alcoholic fatty liver are identical on histology. (4).LFT’s are indicative, not diagnostic. They indicate that a condition may be present but they are unable to diagnosis what the condition is. When a patient presents with raised fasting blood glucose, low HDL (high density lipoprotein), and elevated fasting triacylglycerols they are likely to have NAFLD. (6) Of the imaging techniques MRI is the least variable and the most reproducible. With CT scanning liver fat content can be semi quantitatively estimated. With increasing hepatic steatosis, liver attenuation values decrease by 1.6 Hounsfield units for every milligram of triglyceride deposited per gram of liver tissue (7). Ultrasound permits early detection of fatty liver, often in the preclinical stages before symptoms are present and serum alterations occur. Earlier, accurate reporting of this condition will allow appropriate intervention resulting in better patient health outcomes. References 1. Chalasami N. Does fat alone cause significant liver disease: It remains unclear whether simple steatosis is truly benign. American Gastroenterological Association Perspectives, February/March 2008 www.gastro.org/wmspage.cfm?parm1=5097 Viewed 20th October, 2008 2. Booth, M. George, J.Denney-Wilson, E: The population prevalence of adverse concentrations with adiposity of liver tests among Australian adolescents. Journal of Paediatrics and Child Health.2008 November 3. Catalano, D, Trovato, GM, Martines, GF, Randazzo, M, Tonzuso, A. Bright liver, body composition and insulin resistance changes with nutritional intervention: a follow-up study .Liver Int.2008; February 1280-9 4. Choudhury, J, Sanysl, A. Clinical aspects of Fatty Liver Disease. Semin in Liver Dis. 2004:24 (4):349-62 5. Dionysus Study Group. Drinking factors as cofactors of risk for alcohol induced liver change. Gut. 1997; 41 845-50 6. Preiss, D, Sattar, N. Non-alcoholic fatty liver disease: an overview of prevalence, diagnosis, pathogenesis and treatment considerations. Clin Sci.2008; 115 141-50 7. American Gastroenterological Association. Technical review on nonalcoholic fatty liver disease. Gastroenterology.2002; 123: 1705-25

Power quality enhanced operation and control of a microgrid based custom power park

This paper describes the operation of a microgrid that contains a custom power park (CPP). The park may contain an unbalanced and/or nonlinear load and the microgrid may contain many dis-tributed generators (DGs). One of the DGs in the microgrid is used as a compensator to achieve load compensation. A new method is proposed for current reference generation for load compensation, which takes into account the real and reactive power to be supplied by the DG connected to the compensator. The real and reactive power from the DGs and the utility source is tightly regulated assuming that dedicated communication channels are available. Therefore this scheme is most suitable in cases where the loads in CPP and DGs are physically located close to each other. The proposal is validated through extensive simulation studies using EMTDC/PSCAD software package (version 4.2).

Enhanced human bone marrow stromal cell affinity for modified poly(L-lactide) surfaces by the upregulation of adhesion molecular genes

To enhance and regulate cell affinity for poly (l-lactic acid) (PLLA) based materials, two hydrophilic ligands, poly (ethylene glycol) (PEG) and poly (l-lysine) (PLL), were used to develop triblock copolymers: methoxy-terminated poly (ethylene glycol)-block-poly (l-lactide)-block-poly (l-lysine) (MPEG-b-PLLA-b-PLL) in order to regulate protein absorption and cell adhesion. Bone marrow stromal cells (BMSCs) were cultured on different composition of MPEG-b-PLLA-b-PLL copolymer films to determine the effect of modified polymer surfaces on BMSC attachment. To understand the molecular mechanism governing the initial cell adhesion on difference polymer surfaces, the mRNA expression of 84 human extracellular matrix (ECM) and adhesion molecules was analysed using quantitative reverse transcriptase polymerase chain reaction (qRT-PCR). It was found that down regulation of adhesion molecules was responsible for the impaired BMSC attachment on PLLA surface. MPEG-b-PLLA-b-PLL copolymer films improved significantly the cell adhesion and cytoskeleton expression by upregulation of relevant molecule genes significantly. Six adhesion genes (CDH1, ITGL, NCAM1, SGCE, COL16A1, and LAMA3) were most significantly influenced by the modified PLLA surfaces. In summary, polymer surfaces altered adhesion molecule gene expression of BMSCs, which consequently regulated cell initial attachment on modified PLLA surfaces.

Development and scientific validation of a neonatal ultrasound axial bone scanner

Preterm infants have an increased risk of low bone mass and subsequent fracture due to limited bone mass accretion in utero and a greater need for bone nutrients. The diagnosis of ostepeonia of prematurity remains difficult as there is no sctreening test which is both sensitive and specific.

Temperature enhanced effects of ozone on cardiovascular mortality in 95 large US communities, 1987-2000 - assessment using the NMMAPS data

A few studies examined interactive effects between air pollution and temperature on health outcomes. This study is to examine if temperature modified effects of ozone and cardiovascular mortality in 95 large US cities. A nonparametric and a parametric regression models were separately used to explore interactive effects of temperature and ozone on cardiovascular mortality during May and October, 1987-2000. A Bayesian meta-analysis was used to pool estimates. Both models illustrate that temperature enhanced the ozone effects on mortality in the northern region, but obviously in the southern region. A 10-ppb increment in ozone was associated with 0.41 % (95% posterior interval (PI): -0.19 %, 0.93 %), 0.27 % (95% PI: -0.44 %, 0.87 %) and 1.68 % (95% PI: 0.07 %, 3.26 %) increases in daily cardiovascular mortality corresponding to low, moderate and high levels of temperature, respectively. We concluded that temperature modified effects of ozone, particularly in the northern region.

An investigation into how work-related road safety can be enhanced

Despite the facts that vehicle incidents continue to be the most common mechanism for Australian compensated fatalities and that employers have statutory obligations to provide safe workplaces, very few organisations are proactively and comprehensively managing their work-related road risks. Unfortunately, limited guidance is provided in the existing literature to assist practitioners in managing work-related road risks. The current research addresses this gap in the literature. To explore how work-related road safety can be enhanced, three studies were conducted. Study one explored the effectiveness of a range of risk management initiatives and whether comprehensive risk management practices were associated with safety outcomes. Study two explored barriers to, and facilitators for, accepting risk management initiatives. Study three explored the influence of organisational factors on road safety outcomes to identify optimal work environments for managing road risks. To maximise the research sample and increase generalisability, the studies were designed to allow data collection to be conducted simultaneously drawing upon the same sample obtained from four Australian organisations. Data was collected via four methods. A structured document review of published articles was conducted to identify what outcomes have been observed in previously investigated work-related road safety initiatives. The documents reviewed collectively assessed the effectiveness of 19 work-related road safety initiatives. Audits of organisational practices and process operating within the four researched organisations were conducted to identify whether organisations with comprehensive work-related road risk management practices and processes have better safety outcomes than organisations with limited risk management practices and processes. Interviews were conducted with a sample of 24 participants, comprising 16 employees and eight managers. The interviews were conducted to identify what barriers and facilitators within organisations are involved in implementing work-related road safety initiatives and whether differences in fleet safety climate, stage of change and safety ownership relate to work-related road safety outcomes. Finally, questionnaires were administered to a sample of 679 participants. The questionnaires were conducted to identify which initiatives are perceived by employees to be effective in managing work-related road risks and whether differences in fleet safety climate, stage of change and safety ownership relate to work-related road safety outcomes. Seven research questions were addressed in the current research project. The key findings with respect to each of the research questions are presented below. Research question one: What outcomes have been observed in previously investigated work-related road safety initiatives? The structured document review indicated that initiatives found to be positively associated with occupational road safety both during and after the intervention period included: a pay rise; driver training; group discussions; enlisting employees as community road safety change agents; safety reminders; and group and individual rewards. Research question two: Which initiatives are perceived by employees to be effective in managing work-related road risks? Questionnaire findings revealed that employees believed occupational road risks could best be managed through making vehicle safety features standard, providing practical driver skills training and through investigating serious vehicle incidents. In comparison, employees believed initiatives including signing a promise card commitment to drive safely, advertising the organisation’s phone number on vehicles and consideration of driving competency in staff selection process would have limited effectiveness in managing occupational road safety. Research question three: Do organisations with comprehensive work-related road risk management practices and processes have better safety outcomes than organisations with limited risk management practices and processes? The audit identified a difference among the organisations in their management of work-related road risks. Comprehensive risk management practices were associated with employees engaging in overall safer driving behaviours, committing less driving errors, and experiencing less fatigue and distraction issues when driving. Given that only four organisations participated in this research, these findings should only be considered as preliminary. Further research should be conducted to explore the relationship between comprehensiveness of risk management practices and road safety outcomes with a larger sample of organisations. Research question four: What barriers and facilitators within organisations are involved in implementing work-related road safety initiatives? The interviews identified that employees perceived six organisational characteristics as potential barriers to implementing work-related road safety initiatives. These included: prioritisation of production over safety; complacency towards work-related road risks; insufficient resources; diversity; limited employee input in safety decisions; and a perception that road safety initiatives were an unnecessary burden. In comparison, employees perceived three organisational characteristics as potential facilitators to implementing work-related road safety initiatives. These included: management commitment; the presence of existing systems that could support the implementation of initiatives; and supportive relationships. Research question five: Do differences in fleet safety climate relate to work-related road safety outcomes? The interviews and questionnaires identified that organisational climates with high management commitment, support for managing work demands, appropriate safety rules and safety communication were associated with employees who engaged in safer driving behaviours. Regression analyses indicated that as participants’ perceptions of safety climate increased, the corresponding likelihood of them engaging in safer driving behaviours increased. Fleet safety climate was perceived to influence road safety outcomes through several avenues. Some of these included: the allocation of sufficient resources to manage occupational road risks; fostering a supportive environment of mutual responsibility; resolving safety issues openly and fairly; clearly communicating to employees that safety is the top priority; and developing appropriate work-related road safety policies and procedures. Research question six: Do differences in stage of change relate to work-related road safety outcomes? The interviews and questionnaires identified that participants’ perceptions of initiative effectiveness were found to vary with respect to their individual stage of readiness, with stage-matched initiatives being perceived most effective. In regards to safety outcomes, regression analyses identified that as participants’ progress through the stages of change, the corresponding likelihood of them being involved in vehicle crashes decreases. Research question seven: Do differences in safety ownership relate to work-related road safety outcomes? The interviews and questionnaires revealed that management of road risks is often given less attention than other areas of health and safety management in organisations. In regards to safety outcomes, regression analyses identified that perceived authority and perceived shared ownership both emerged as significant independent predictors of self-reported driving behaviours pertaining to fatigue and distractions. The regression models indicated that as participants’ perceptions of the authority of the person managing road risks increases, and perceptions of shared ownership of safety tasks increases, the corresponding likelihood of them engaging in driving while fatigued or multitasking while driving decreases. Based on the findings from the current research, the author makes several recommendations to assist practitioners in developing proactive and comprehensive approaches to managing occupational road risks. The author also suggests several avenues for future research in the area of work-related road safety.